Lifting Glass Reactor 5L/10L/20L/30L/50L (GRL series)

PDF DownloadShare With:
DescriptionSpeciaficationRelated ProductsInquiry
Description

Applications

Speed-regulation glass reactors are mainly used for synthetic reaction, distillation and concentration of different types of materials. We have single wall, double wall and triple wall glass reactors. The reactor can be pumped to a negative pressure state according to some experimental requirements. A constant pressure funnel or an adjusting valve on the feeding bottle allows you to add material to the vessel at a uniform and controlled speed. Condenser helps to recover some materials distillated during reaction. Circulating liquid can be filled into the jacket to heat or cool materials inside. Triple wall glass reactor with two jackets, the inner jacket is for circulating liquid, and the outer layer should be pumped to vacuum condition for thermal insulation.

 

Model

 

                     Lifting Glass Reactor                                                                     

Zhengzhou Greatwall Scientific Industrial and Trade Co., Ltd.

 

● Vessel and lid can be separate.

● glass vessel can be lifted up, and angled 120 degree both sides.

● PTFE and FV rubber material cock sealing with PTFE covered O-ring.

● Patented PTFE stirring shaft with long life-span.

● Stainless steel 304 supporting frame.

● PTFE discharge valve with fluorine covered O-ring.

● All glasswares are high borosilicate glass 3.3.

● Swivel caster with lock for reactor safety.

● Openings are sealed with flanges; higher vacuum degree, easy disassemble.

 

 

Detail Sketch

Zhengzhou Greatwall Scientific Industrial and Trade Co., Ltd.

 

 

 

Advantages

● High borosilicate glass has good physical and chemical properties.

● Wide working temperature range: -80℃ to 200℃.

● It can work under normal pressure and negative pressure, its vacuum degree can reach to 0.095MPa.

● The vessel can withstand the pressure range from -0.1MPa to 0MPa.

● Teflon(PTFE) and FV rubber material cock or discharge valve; Sealing together with PTFE covered O ring.

● Designed with vacuum gauge and temperature display unit.

 

Lifting and Rotating function    

 

Zhengzhou Greatwall Scientific Industrial and Trade Co., Ltd.

 

 

Excellent & durable parts for your safe experiment

 

Zhengzhou Greatwall Scientific Industrial and Trade Co., Ltd.

Specification

Precautions

High borosilicate glass composition table

Item

Specifications

Linear thermal expansion coefficient

3.33x10 'k"'

Silicon dioxide

80.14%(g/g)

Ferric oxide

0.023%(g/g)

Aluminum oxide

2.22%(g/g)

Calcium oxide

0.15%(g/g)

Magnesium oxide

0.026%(g/g)

Potassium oxide

0.077%(g/g)

Sodium oxide

4.36%(g/g)

Diboron trioxide

13.00%(g/g)

 

Technical specifications

Model GRL-5(Ex) GRL-10(Ex) GRL-20(Ex) GRL-30(Ex) GRL-50(Ex)

Glass material

High borosilicate glass
Sensor material Stainless steel coated by fluorine, double anti-corrosion

Temperature range

-80~200℃
Speed control Frequency speed control
Bearable temperature difference 60℃(Triple wall), 80℃(Double wall)
Diameter of circulating fluid inlet and outlet DN15
Power supply 220-240V~,50/60Hz

Precautions

 

● Max. working temperature is 200℃, and the max. temperature difference between the internal and external of the reactor is 80℃. When heating or cooling the reactor, it's recomended to monitor the temperature inside and outside the vessel continously and heat up or cool down gradually to avoid accidents.

● Bearable temperature difference: 100℃ (jacketed), 80℃ (double jacketed).

● Reactor vessel can withstand the pressure ranges from -0.1MPa to 0MPa.

● For IIB explosive atmosphere, dIIBT4 standard explosion-proof parts (heater, control box, motor, wires) will be used for safety concern.

 

Your safety is important to us! Please use caution when operating. Users must take all necessary precautions to avoid contact with rotating parts, particularly entanglement of loose clothing, hair, necklaces, or other jewelry. Under these circumstances, the winding action of the rotating parts can draw the user(s) into the apparatus, resulting in breakage of glassware, burns, and/or chemical exposure. Extra caution must also be taken when operating with air-reactive materials, especially under vacuum. A leak can draw air into the apparatus and cause a violent reaction to occur.

 

 

Related Products
Inquiry
Inquiry